Table of Contents
Advertisement
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
MODE CONTROL
4 settings: Cool, Heater*, Dehumidify & Fan.
Settings: COOL, DRY, FAN and HEAT*.
Settings: COOL, DRY and FAN.
3 settings: Cool, Dehumidify, Fan.
The corresponding indicator light will illuminate to indicate the current mode setting.
• Cooling Mode
Air Conditioning Mode (COOL)
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 16°C- 32°C (61°F- 89°F).
Temperature setting range is 16°C - 32°C (60°F - 90°F).
• Dehumidifying Mode (DRY)
Fan speed is preset to LOW.
Air is dehumidified as it passes through the unit, without being in full cooling mode. If room tempera-
ture is higher than 25°C (77°F) fan speed can be adjusted; otherwise fan speed is preset to LOW.
Note: If the unit will be used mainly as a dehumidifier, do not connect the exhaust hose. Continuous
drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).
• Fan Mode (FAN)
For air circulation without air conditioner cooling.
•
• Heating Mode* (HEAT)
When heating mode is selected the indicator light will shine. Heating is activated only when the ambient
In this mode, the desired temperature can be set between 16°C - 32°C (60°F - 90°F). When in heating
temperature is below 25°C (77°F). In this mode, the desired temperature can be set between 16°C- 25°C
mode condensation must be drained from the lower drain plug.
(61°F- 77°F).
Note: The air exchange hoses must vent outside the room when using heating mode.
• Sleep Mode (SLEEP)
When the Sleep Mode is activated in Air Conditioning mode, the set temperature will increase by 1°F
or 1°C after the first hour of cooling and will increase a further 1°F or 1°C after the second hour of
cooling. The unit will maintain this temperature for 5 hours. The set temperature will then reduce by
1°F or 1°C on the seventh hour and reduce a further 1°F or 1°C on the tenth hour. Sleep mode will
then deactivate automatically.
Note: The Sleep Mode can be deactivated during cooling mode by pressing any button at any time.
In Heating Mode*, the set temperature will reduce by 2°F or 2°C after the first hour of heating* and will
reduce a further 2°F or 2°C after the second hour of heating*. The unit maintains heating* at this
temperature for 5 hours. Then, the set temperature will increase 2°F or 2°C at the seventh hour and
will increase a further 2°F or 2°C on the tenth hour. Sleep mode will then deactivate automatically.
Note: The Sleep Mode can be deactivated during cooling or heating* mode by pressing any button at
any time.
*Applicable for models with Heating feature only.
EN
5
Hide quick links:
Advertisement
Table of Contents
