Use And Operation; Power Control; Mode Control - Honeywell MN09CES User Manual

INSTALLATION (CONTINUED)
NOTE:
1. The supplied exhaust hose can be extended from 30 cm to 120 cm / 12 inches to 47 inches.
2. Do not bend (to the extent shown below) the exhaust hose. A bent hose will block exhaust air and
cause the unit to malfunction or shut-off.
NOT RECOMMENDED
• The length of the exhaust hose is determined by the product specifications. Do not replace or
lengthen it as this could cause the unit to malfunction.
• Make sure the back of the unit is at least 50 cm / 20 inches away from. Do not place the unit in front
of curtains or drapes as this could obstruct the airflow.
USE & OPERATION
TOUCH SCREEN CONTROL PANEL
(1)
(1) Timer Control

(4) Mode Control

POWER CONTROL

The Power Control turns the unit on and off.
MODE CONTROL
3 settings: Cool, Dehumidify, Fan. 4 settings: Cool, Heater*, Dehumidify & Fan.
A light will indicate which setting is currently being used.
• Cooling Mode
The unit works as an air conditioner. Adjust fan speed and air temperature to suit your desired comfort
level. Temperature setting range is 16°C- 32°C (61°F- 89°F).
• Heating Mode*
When heating mode is selected the indicator light will shine. Heating is activated only when the ambient
temperature is below 25°C (77°F). In this mode, the desired temperature can be set between 16°C- 25°C
(61°F- 77°F). Note: The air exchange hoses must vent outside the room when using heating mode.
4
(2) (3)
(2) Fan Speed Control
(5) Power Control
50 cm / 20"
RECOMMENDED
(3)
(3) Timer / Temperature Set Controls
(6) Warning Light (when flashing)
EN
(4) (5) & (6)