Setting Basic Functions; Setting The Time; Selecting 12- Or 24-Hours Time Display; Setting Display Screen Brightness - Sonoro Cubo Instruction Manual

4. Setting Basic Functions

4.1 Setting the time

1. Switch the device to standby mode.
2. Press MENU, the display will show SET-CLOCK.
3. Press MENU again, the clock time display will fash.
4. Use the TUNING controls to set the hour as desired.
5. Use the VOLUME controls to set the minutes as desired.
6. To save, press MENU again.

4.2 Selecting 12- or 24-hours time display

1. Switch the device to standby mode.
2. Press MENU, the display will show SET-CLOCK.
3. Press one of the SKIP buttons until SET-12/24 appears on the display.
4. Press MENU again and select the desired AM/PM format with the SKIP buttons.
5. Save the selection with

4.3 Setting display screen brightness

1. Switch on the device.
2. Press the MENU button.
3. Press one of the SKIP buttons until you see DISPLAY on the screen.
4. Press the MENU button again, then use the VOLUME button to select the desired
brightness HIGH, LOW or OFF is shown on the display.
5. Save your selection by pressing the

4.4 Muting function

During audio playback, press the SNOOZE button to mute the sound.
Press the button again to turn the sound back on.

4.5 Automatic switch off

1. While the device is on, press
appears on the display.
2. After pressing the
of minutes after which the device is to switch itself off.
3. The OFF setting will deactivate the function.
4. Confirm the input with
MENU.
MENU button.
MENU and then SKIP as often as necessary until SLEEP
MENU button again, you can use the volume button to set the number
MENU.
11