Quick Scan, Automatic Station Search (Channel 10; Manual Dab+/Dab Station Search; Station Selection; Station Information - Sonoro Cubo Instruction Manual

6.2 Quick Scan, automatic station search (Channel 9...13)
For a quick station scan, press the TUNING + button for at least two seconds.
The DAB cubo will automatically start the station scan in channels 9 to 13.
The display will first show "Q Scan" and then the scanning progress in %.
Then the number of received services (radio stations) will be shown on the
display, e.g.: 10 Serv.
The DAB cubo stores the number of available stations and will automatically jump to the
first available station.

6.3 Manual DAB+/DAB station search

Press and hold the STOP (INFO) button for more than two seconds until the display indicates
Manual. Confirm this by pressing the PLAY (ENTER) button, and then you can select a DAB
channel with the TUNING + and TUNING – buttons. Confirm the selected DAB channel by
pressing the PLAY (ENTER) button; then you can browse the DAB stations with the TUNING +
and TUNING - buttons and confirm one by pressing the PLAY (ENTER) button.

6.4 Station selection

You can switch between the stations by using the TUNING + and TUNING - buttons to
browse through the station list.

6.5 Station information

The DAB cubo displays additional information for each station. You can browse this station
information by briefly pressing the STOP (INFO) button.
1. Station name*
2. Current date of day
3. Multiplex/Ensemble name*
4. Information about the current program*
5. Signal strength indicator
6. Type of station
7. Stereo or mono reception, station's audio data rate
8. Frequency
*Note: Press 'Play' to display clock time.
(i.e. DOMRADIO)
(i.e. 08.07.2010)
(i.e. NRW K12)
(i.e. INFOS- WETTER-.....)
(i.e. Signal 85%)
(i.e. Pop Music)
(i.e. Mono, 64 kbps)
(i.e. 229 MHz)
13