Scientific Atlanta Continuum DVP eXtra Dense QAM Array 24 Configuration Manual page 76

Chapter 5 Viewing Alarm Messages
Alarm/Reference/Detail
Alarm: Qam Card <X>: Misc
Ref: Lower Channel Output
<Y> bit rate too high
Detail: - - - -
62
Description
If there is too much video and data being routed to the QAM channel
and the QAM card is dropping packets of data, then this alarm will be
raised. The amount of data that can be routed to a QAM channel is
dependant on the QAM mode (64 or 256) and the ITU configuration of
you system (ITU-A, ITU-B or ITU-C). To clear the alarm, route less
audio and video to the QAM channel.
<X> represents the QAM card number and <Y> the RF output
number.
4018055 Rev B