Table of Contents
Advertisement
MAC Addresses: This is an advanced setting and sets the number of MAC
addresses in the system.
The number of MAC Addresses can be set to one of two:
- one : the MAC address of GbE Input1 is used, and the same MAC address will
be used for GbE Input2.
- two : the default MAC addresses of GbE Input 1 and GbE Input 2 will be used.
Note: Using two MAC addresses is recommended.
To Change the Backup Interface Settings
The following procedure describes how to set the backup interface settings of the
XDQA24.
1
On the web browser user interface of the XDQA24 system, click the Input link.
Result: The Input configuration page is displayed.
In the Enable Main To Backup drop down box, select Yes or No to enable or
2
disable the main to backup function.
3
Enter the delay time in the Delay box next to the Enable Main To Backup drop
down box.
In the Enable Backup To Main drop down box, select Yes or No to enable or
4
disable the backup to main function.
5
Enter the delay time in the Delay box next to the Enable Backup To Main drop
down box.
In the Detection drop down box, select the detection mode, On GbE Link Only or On
6
GbE Link With UDP :
7
In the MAC Addresses drop down box, select the number of MAC addresses.
8
Press the Apply command button to confirm or the Reload command button to
abort the operation.
4018055 Rev B
Configuring the GbE Input
27
Advertisement
Table of Contents
Troubleshooting
