Changing The Transport Stream Identifier - Scientific Atlanta Continuum DVP eXtra Dense QAM Array 24 Configuration Manual

Chapter 3 Configuring the XDQA24 System
Note: The XDQA24 system allows changing the default settings of the mapping rule.
For more information concerning the mapping rules, please refer to the Continuum
DVP (X)DQA(24), DQA Mapping Assistant Tool for User-Defined UDP Port Mapping
Application Note.

Changing the Transport Stream Identifier

The Transport Stream identifier serves as a label to identify the transport stream of
the channel in question from any other transport stream in the network. The Program
Association Table (PAT) includes the Transport Stream identifier.
1 On the XDQA24 configuration site, click the QAMs link.
Result: The QAMs page is displayed.
2 In the Lower and Upper - Transport Stream IDs of the QAM Card in question,
enter the Transport Stream identifier. A value can be entered in the range
between 1 and 65535.
3 Press the Apply command button to confirm or the Reload command button to
abort the operation.
Note: The original Transport Stream ID in a MPTS will not be changed, but is passed
transparantly, unless the XDQA24 is instructed to regenerate the PAT (must be set in
mapping table).
38 4018055 Rev B