B) Menu Settings - Renkforce RUSD-1803 Operating Instructions Manual

OPEN button (5)
Press this button to unlock the control panel.
RESET function
This button resets all the settings to the original settings that were made in the factory.
Press the RESET button (22) with a sharp object (e.g. a straightened paper clip) in the following situations:
- when you have completed the installation and connection
- when the car radio does not react to the operation of buttons any more
- when the display shows undefined characters

b) Menu settings

To select the menu settings, press the rotary control (12) until the desired function is shown in the display.
Choose the options for the respective settings by turning the rotary control.
Overview:
BAS > TRE > BAL > FAD > LOUD > EQ > STEREO/MONO > LOC > BEEP > TA > PI > RETURN > MASK
BAS adjusts settings for low pitch tones
TRE adjusts settings for high pitch tones
BAL adjusts the volume of the right and left loudspeakers
FAD adjusts the volume of the front and rear loudspeakers
LOUD ON/OFF
LOUD ON: The loudness correction is active.
LOUD OFF: The loudness correction is inactive. The sound is not influenced.
At low volumes the human ear does not perceive very low and very high sounds well. An incre-
ase of the frequency range for low volume (loudness correction) counteracts this effect and the
music replay sounds more natural.
EQ - EQUALIZER
EQ OFF Equalizer switched off
CLASS Pre-setting for classical music
POP Pre-setting for pop music
ROCK Pre-setting for rock music
FLAT Equalizer switched on, linear frequency input
38