Technical Data; Functional Description; Intended Use - Festool CXS Instruction Manual

Cordless drill
Motor voltage
Idling speed*
Max. torque
Soft material
Hard material
Adjustable torque
Chuck clamping range
Drill diameter max.
Tool holder in drill spindle
Weight without battery pack with Centrotec
* Speed specifications with fully charged battery pack.
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Charging times for
LiIon 1,5 Ah, 80 %/ 100 %
Permitted operating tempera-
ture range
Temperature monitoring
Safety class
Battery pack
Voltage
Capacity
Number of cells
Permitted battery temperature
for charging
Weight

Technical data

MXC
120 V ~
60 Hz
10.8 V=
typ. 2.8 A
approx. 23/ 35 min
-10 °C to + 40 °C
via NTC-resistor
/II
XS-AS
10.8 V
1.5 Ah
3
0 °C to + 45 °C
0.2 kg
1st gear
2nd gear
(wood)
(metal)
1st gear
2nd gear
Wood
Metal

Intended use

Cordless drills are suitable for drilling into metal,
wood, plastics and similar materials as well as in-
serting and tightening screws.
The charger MXC is designed for charging the bat-
tery packs listed.
The charger is designed for internal use only.
WARNING
The user bears the responsibility for damage and
accidents caused by improper use; this also in-
cludes damage and wear caused by continuous
use in industry.

Functional description

The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1] Torque thumbwheel
[1-2] Drilling symbol
[1-3] Torque/drilling position marking
CXS
10.8 V
0 - 400 rpm
0 - 1200 rpm
10 Nm
16 Nm
0.2 - 2.4 Nm
0.2 - 2.4 Nm
1 - 8 mm
12 mm
8 mm
1/4 ''
0.7 kg
9