Type Of Cut - Black & Decker SM1850BD Instruction Manual

Bevel/Miter Settings
NOTE: The chart below references a compound cut for crown molding ONLY WHEN
THE ANGLE BETWEEN THE WALLS EQUALS 90°.
BEVEL
KEY
SETTING
IL 33.9°
IR 33.9°
OL 33.9°
OR 33.9°
MITER
SETTING
Inside corner-Left side
31.6° Right 1. Position top of molding against fence.
2. Miter table set at RIGHT 31.6°.
3. LEFT side is finished piece.
Inside corner-Right side
31.6° Left 1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6°.
3. LEFT side is finished piece.
Outside corner-Left side
31.6° Left 1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6°.
3. RIGHT side is finished piece.
Outside corner-Right side
31.6° Right 1. Position top of molding against fence.
2. Miter table set at RIGHT 31.6°.
3. RIGHT side is finished piece.

TYPE OF CUT

28