Download  Print this page

Saw Operation; Eye Protection - Black & Decker SM1850BD Instruction Manual

7-1/4 in. sliding compound miter saw
Hide thumbs

Advertisement

Table of Contents

SAW OPERATION

Problem
Possible Cause
• Blade hits
• Misalignment.
table.
• Angle of cut
• Miter table unlocked.
not accurate.
• Sawdust under table.
Can not adjust
miter.
• Cutting arm
• Loose pivot points.
wobbles.
• Cutting arm
• Pivot spring not replaced
will not fully
raise, or blade
• Sawdust build-up.
guard won't
fully close.
• Blade binds,
• Improper operation.
jams, burns
• Dull or warped blade.
wood.
• Improper blade size.
• Wood is moving during cut.
• Saw blade not round / damaged
• Saw vibrates
or shakes.
• Arbor bolt loose.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK+DECKER help line at
1-844-437-5095.
BLACK+DECKER and the BLACK+DECKER logo are registered trademarks of
BLACK+DECKER and are used under license. All rights reserved.
TROUBLESHOOTING
properly after service.
/ loose.
Power Tool Specialists, Inc.
684 Huey Road
Rock Hill, SC 29730 U.S.A.
Possible Solution
• See ADJUSTMENT -Setting
• See OPERATION - Miter Angle
• Vacuum or blow out dust. WEAR
• Contact Service Center.
• Clean and lubricate moving
• Contact Service Center.
• See BASIC SAW OPERATION
• Replace or sharpen blade.
• Replace with 7-1/4 in. diameter
• Use hold down clamp to secure
• Replace blade.
• Tighten arbor bolt.
Imported by
33
Cutting Depth section.
Adjustment section.

EYE PROTECTION.

parts.
section.
blade.
workpiece to table.
TM

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Black & Decker SM1850BD

This manual is also suitable for:

M1850bd