Connecting To A Flash Unit - Sony DXC-970MD Instructions For Use Manual

Connecting to a Flash Unit

Connecting the camera to a flash unit
Image processor
or printer
Video output
connector
Video input connector
Video monitor, VCR, etc.
Note
Only a limited selection of printers may be connected to the
DXC-970MD. For details, connect your authorized Sony
dealer.
Synchronization cable
Remote connector
Video input
connector
CCMC-9DSMN cable
Master mode connection
Flash
DXC-970MD
FLASH MENU FUNCTION DATA
FLASH
UP LENS
WHITE
BARS
DOWN
CCU
RGB/SYNC
VIDEO OUT REMOTE
DC IN/ GEN LOCK
REMOTE
RGB/SYNC
DC IN/
REMOTE
CCDC-5/10/25/50A/100A cable or
CCMC-12P02/05/10/25 cable
CMA-D2MD
camera adaptor
1
Set the MODE selector
to the "1" position.
2
CAMERA
(4-pin or 12-pin)
Power
cord
AC IN
83