Sony DXC-970MD Instructions For Use Manual page 95

3. General Setup menu (page 3)
M.Pedestal [–99 to +99]
Adjusts the darkness level of the black parts of the image.
Use this function to bring out details of heavily shaded
areas. Use of a waveform monitor will make the adjustment
easier. Normally set to 0.
+
Lighter
–
Darker
Detail [–99 to +99]
Adjusts the sharpness of the object outlines of an image.
+
Sharper with more detail on the image outline.
–
Softer with less detail.
H.Phase [–99 to +99]
When an external reference sync signal for locking the
camera sync generator is input to the GEN LOCK
connector on the rear panel, the camera operates at the
frequency of the reference signal. You can use the H.Phase
function to perfectly synchronize the camera operation with
the reference signal to the level of the horizontal phase.
Note
If there is not an external sync signal, no value is displayed.
SC Phase [0/180], (SC)fine [–99 to +99]
When locking the camera sync generator, use the SC Phase
function to adjust the subcarrier phase. First set to between
0° and 180° for rough adjustment, then use (SC)fine for
fine adjustment.
Note
If there is no external sync signal, no value is displayed.
95