Sony DXC-970MD Instructions For Use Manual page 98

Changing the Camera Settings
VD
Flash
WEN pulse
Video signal
Printer Trig. [on/off]
You can connect a printer to the camera unit and send
images to the printer (memory-in) for printing.
Set Printer Trig. to on and input an external timing pulse
from the RGB/SYNC
you press the FLASH button, the image is sent to the
printer memory, or the image is printed out from the printer.
Set the printer to store or print the image.
For more details, see "Connecting to a Printer" on page 80.
98
A flash is emitted during this period.
ODD EVEN ODD
Flash timing chart
connector to the printer. When
EVEN ODD EVEN
Note
• When in the Printer Trig. mode, the RGB/SYNC
connector automatically switches to the following
settings:
SYNC n WEN
G sync n ON
If you set the Printer Trig. mode to OFF, the G sync will
remain set to ON.
• You cannot use the "flash" and the "printer" functions at
the same time. The menu is set up so that only one can be
selected at any one time.
For details on the printer settings, see the operation
manual for the printer.
ODD EVEN