Hazard Symbols - daltile DAD2 Operating Manual

HAZARD SYMBOLS

READ MANUAL CAREFULLY BEFORE USE
●
Carefully read and understand
this operating manual and the
enclosed safety instructions
prior to using the machine.
WEAR SAFETY GEAR
●
Always wear safety glasses,
gloves and hearing protection
when operating the machine
DO NOT SPRAY WATER ON TILE DRILL
●
Avoid direct water spray on
motor and switch housing
when cleaning.
TURN OFF DRILL BEFORE PLUGGING IN
●
It is important to make sure that
the switch is in the OFF position
before plugging in the machine
to prevent accidental starting of
the machine.
DALTOOL
®
SAFETY
ELECTRICAL SHOCK
●
It is important to never touch
electrical components of the
machine while the machi-
ne is in operation.
KEEP AWAY FROM MOVING PARTS
●
It is important to keep hands,
feet, hair and clothing away
from all moving parts to prevent
injury. It is also important to be
sure that covers and guards are
always in their proper position.
If not, serious injury can occur.
DALTOOL DAD2 OPERATING MANUAL V10/2007R1 PAGE 7