Table of Contents
Advertisement
KEEPING THE WORK AREA CLEAN.
●
It is important that the working area be
clean so as to avoid potential accidents
or injuries.
DO NOT USE THE EQUIPMENT IN
●
DANGEROUS ENVIRONMENTS.
It is important that power tools not be
used in wet environments. The equip-
ment should never be used in the rain.
Also, it is advisable to keep the working
area well lit.
CHILDREN SHOULD BE KEPT AWAY
●
FROM THE WORKING AREA.
Only the operator of the equipment
should be in the working area. All other
people especially children should be
kept away at
KEEP THE WORKING AREA
●
CHILDPROOF.
It is important to keep the working area
child proof. This can be done by using
locks on the equipment, plastic plugs for
the electrical outlets and possibly even
master switches on the equipment.
DO NOT DRY DRILL WITH THE MACHINE
●
The machine is not intended for dry dril-
ling use. Always use sufficient water to
wet drill tile, brick or natural stone. Dry
drilling will result in dangerous dust
levels (See also California Proposition 65
message) and can damage the equip-
ment. Any damaged equipment that is
returned due to dry drilling will be
repaired or replaced totally at the
customers expence. There will be no
warranty claim.
DALTOOL
a safe distance.
SAFETY
®
FORCING THE TOOL.
●
The equipment was designed to do a
certain job. Do not force the equipment
to do something that it wasn't designed
to do.
CLOTHING.
●
It is important that the operator does not
wear loose clothing that can potentially
get caught in moving parts of the equip-
ment. It is recommended to wear non-
slip shoes along with a hair covering to
keep hair away from the moving parts.
SAFETY GLASSES, GLOVES AND
●
HEARING PROTECTION.
It is important to wear safety
glasses and hearing protection
when operating any type of
equipment. Be sure that the
safety glasses you wear are
impact resistant.
SECURE WORK
●
Make sure your work piece is secured
in such a way that it will not rotate in the
event the diamond drill bit locks.
Clamps or a vise should be used to hold
your work whenever practical. Keeping
your hands free to operate the machine
is safer. When securing the material to
be cut by hand, be sure your hands stay
as far away as possible from the rotating
diamond Bit
PROPER FOOTING
●
It is important to keep proper footing
and balance at all times when operating
equip ment. If proper footing is not
observed by doing such things as over
reaching, serious injury may occur.
DALTOOL DAD2 OPERATING MANUAL V10/2007R1 PAGE 5
Advertisement
Table of Contents
