Digital Output 43 - Philips DVD962SA Owner's Manual
Digital video disc player
Hide thumbs
Also See for DVD962SA:
- Technical specifications (2 pages) ,
- Service manual (158 pages) ,
- Owner's manual (32 pages)
Table of Contents
Advertisement
After connecting the DVD Player to your TV and other equipment, you may
need to change the DVD Player's Digital Output setting. Look to see which
DVD Player audio jacks you connected to your other equipment, then set
your Digital Output accordingly. The information in step 4 will help you make
your choice.
1
Press SYSTEM MENU, then press ; to select V V .
2
Press p repeatedly to select q, then press B.
3
Digital output will be selected. Press the B button.
4
Press o or p to select Off, PCM only, or All, then press the OK
button.
G
Select All if you used the COAXIAL (Digital Audio Out) jack to connect
the DVD Player to a Stereo Receiver that has a Multi-channel Decoder.
Details are on page 14.
All is the preset factory setting.
G
Select Off if you did not use either of the COAXIAL or OPTICAL (Digital
Audio Out) jacks. For example, if you used the supplied red and white
audio cables to connect the AUDIO OUT jacks of the DVD Player to a
TV or Stereo, select Off.
G
Select PCM only if you used the COAXIAL or OPTICAL (Digital Audio
Out) jacks of the DVD Player for connections, but the audio equipment
does not include a digital multi-channel Decoder.
V
W
X
Y
1
2
1en
p
Digital output
PCM output
q
Analog output
5
Press the SYSTEM MENU button to remove the menus.
Z
}
a
off
no
off
s p
Off
PCM only
All
Digital Output 43
1,5
T-C
RESUME
1
4
7
RETURN
DISC
MENU
1-4
É
G
STOP
Ç
SUBTITLE
ANGLE
REPEAT
REPEAT
A-B
Helpful Hints
• Discs are recorded in a certain
sampling rate. The higher the
sampling rate, the better the
sound quality. Adjust PCM Output
to match the sampling rate of
your Disc if necessary. Press the
SYSTEM MENU button, then
press ; to select V. Press p
repeatedly to select q, then press
B. Press p repeatedly to select
PCM Output, then press B.
Press o or p to choose 48kHz
or 96kHz. (Select 96kHz if the
disc was recorded in PCM
96kHz. Otherwise, select
48kHz.) Press OK, then press
SYSTEM MENU to remove the
menus.
• If you set the PCM Output to
96kHz, the sound may be muted
if the disc is copyright protected.
POWER
2
FTS
SOUND MODE
2
3
5
6
8
9
DISPLAY DIM
0
SYSTEM
MENU
É
OK
H
PLAY
PAUSE
Å
É
ZOOM
AUDIO
SHUFFLE
SCAN
Advertisement
Table of Contents
