Installation - D-Link DES-1016A Quick Installation Manual

Check Your Package Contents
These are the items included with your DES-1016A / DES-1024A purchase:
DES-1016A /
DES-1024A
Notice Before Setup the DES-1016A / DES-1024A
The setup of the Switch can be performed using the following steps:
A. Install the DES-1016A / DES-1024A in a fairly cool and dry place. See Technical
Specifications for the acceptable operation temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and
direct sunlight.
C. Make sure that there is proper heat dissipation from and adequate ventilation around the
Switch. Do not place heavy objects on the Switch
D. Visually inspect the power cable and ensure that it is firmly inserted into a suitable power
outlet.

Installation

Desktop or Shelf Installation
When installing the Switch on a desktop
or shelf, the rubber feet included with
the device must be first attached. Attach
these cushioning feet on the bottom at
each corner of the device. Allow enough
ventilation space between the device
and the objects around it.
Quick Installation Guide
DES-1016A / DES-1024A
16 / 24-Port 10/100 Mbps Fast Ethernet Switch
Quick Installation
Guide
Power Cord
.
The Switch can be mounted in an EIA standard size, 19-
inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets
on the switch's front panel (one on each side) and secure
them with the screws provided.
Then, use the screws provided with the equipment rack
to mount the Switch in the rack.
1
Rack-mount
bracket
Rack Installation