Table of Contents
Advertisement
Configuration
Event Action Setup
You can program the DVR to record, activate the alarm output, and/or notify the
remote site whenever sensor, motion or video loss events are detected. In the Event
Action menu (MENU
or Video Loss Action) and then press
display.
Alarm In Event Action (Record) Setup Screen
The DVR can be set to react to events differently. Each sensor can be assigned a
schedule, camera, recording speed, video quality, and dwell time.
1.
2.
3.
4.
Rev 1.00
Figure 3-31
Highlight the Sched box and then press
schedule as described earlier (see
Highlight the Camera box and then press
Select the camera number you would like to associate with the sensor.
Note
You can associate multiple cameras with a sensor.
Highlight the Speed box and select number of images per second you would like
to record from the drop-down list.
Highlight the Quality box and select the image quality you want to record from
the drop-down list.
Event Action) select Alarm-In Action, Motion Action,
. The following Event Action setup screens
Alarm In Event Action Setup Screen
Time-Lapse Recording
51
. A schedule screen displays. Set the
Schedule, page 49).
. A camera selection screen display.
Document 900.0258
09/04
Advertisement
Table of Contents
