Storage Screen; Figure 3-13 Storage Screen - Honeywell HRHD4+ User Manual

Configuration

Storage Screen

Highlight Storage in the System menu (MENU
press
The DVR displays the storage status when the installed IDE hard disk drives support
the S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) monitoring
program.
The Type field displays the type and capacity of storage devices.
The Status field displays the device status or fault conditions. The choices are
described as follows:
Table 3-2
Status
Good
Bad
S.M.A.R.T. Inop.
Rev 1.00
. The Storage setup screen displays.
Figure 3-13 Storage Screen
Note When the DVR has more than four storage devices, you can
scroll through the list by selecting the Up and Down arrows
under the list.
Storage Screen Status Options
33
System
Description
The storage condition is normal.
Data cannot be written on or read from the
storage device.
Storage conditions are normal; however, the
S.M.A.R.T. monitoring is not working or is not
supported.
Storage) and then
Document 900.0258
09/04