Figure 3-18 Ptz Device List - Honeywell HRHD4+ User Manual

Configuration
1.
2.
3.
4.
Rev 1.00
You can turn the camera number On or Off, and also hide the video of the
camera number by highlighting the Camera and then pressing
settings for all the cameras on the page (for example, cameras 1 to 4 as shown in
Figure 3-17), highlight the camera Setup heading and then press
the following options in the drop-down list:
On, Off, Covert 1, Covert 2
Note When you select Covert 1, the DVR displays the camera title
and status icons on the covert video. When you select Covert
2, the DVR displays only the camera title on the covert video.
To assign titles to each camera, highlight the Title heading and then press
virtual keyboard (see
Figure 3-7.
Selecting the PTZ Device box causes a list of controllable cameras to display.
Select your camera from the list and then press
camera to the RS485 terminal on the back of the DVR following the camera
manufacturer's instructions.
Figure 3-18
To assign IDs to each camera, highlight the ID heading and then press
change the number, highlight it and use the Up and Down Arrow buttons to
increase and decrease the numbers.The PTZ ID number can be set from 0 to
256.
Figure 3-7) allows you to enter camera names. See
PTZ Device List
38
. To change the
. Select from
. You must connect the
Document 900.0258
. A
. To
09/04