Table of Contents
Advertisement
Configuration
Highlight S.M.A.R.T. Setup and then press
Your DVR shows the condition of the hard disk drives if the installed IDE hard disk
drives support the S.M.A.R.T. program. Highlight the box beside Use and then press
to toggle between On and Off.
The Last-check field displays the date and time information of the last storage check.
1.
2.
3.
4.
5.
System Log Screen
Highlight System Log in the System menu (MENU
and then press
Rev 1.00
Figure 3-14
Highlight the box beside Period and select from Daily, Weekly, or Monthly
for the check interval.
Note
When selecting Weekly or Monthly, the Day of Week or Day
of Month field displays under the Period field. Select the check
day or date.
Highlight the box beside Check Time and adjust the numbers using the Arrow
buttons.
Highlight the box beside Temperature Threshold and adjust the numbers
using the Arrow buttons. Set the temperature number to the hard disk drive
manufacturer specifications. If this temperature is ever exceeded, the S.M.A.R.T.
Alert message displays.
Highlight the box beside Sensor Unit and select from Celsius or Fahrenheit.
To save you changes, highlight OK and then press
screen without saving the changes.
. The System Log screen displays.
. The S.M.A.R.T. Setup screen displays.
S.M.A.R.T. Setup Screen
35
. Select Cancel to exit the
System
Storage Log)
Document 900.0258
09/04
Advertisement
Table of Contents
