Panasonic WV-SUD638-H Operating Instructions Manual page 65

–
When shooting a subject whose luminance is too low
•
When "AWC" is selected, click the [Set] button.
[Red gain]
Adjust the red color of images.
When the cursor is moved in the "+" direction, the red color will become thicker. When the cursor is moved in
the "-" direction, the red color will be thinner. Click the [Reset] button to reset the color to the default.
•
Default: 128
[Blue gain]
Adjust the blue color of images.
When the cursor is moved in the "+" direction, the blue color will become thicker. When the cursor is moved
in the "-" direction, the blue color will be thinner. Click the [Reset] button to reset the color to the default.
•
Default: 128
[DNR]
The digital noise reduction function reduces noise automatically under the condition of low illuminance. Select
an effect level "High" or "Low" for the digital noise reduction.
•
High: High DNR, increases afterimage
•
Low: Low DNR, reduces afterimage
•
Default: High
[Stabilizer]
Select "On" or "Off" to determine whether or not to activate the stabilizer function that uses a hybrid correction
system of "electronic stabilization" and "pan/tilt stabilization".
•
Default: Off
"Electronic stabilization" and "pan/tilt stabilization" hybrid correction system
Hybrid correction corrects image distortions caused by camera movement from wind, vibrations to the camera
installation area, etc.
•
Electronic stabilization
Electronic stabilization uses arithmetic computing technology to pick up images that were affected by
vibrations and reduce the distortions in those images before displaying them. This is effective with
correcting minor distortions over a wide range of frequencies.
•
Pan/tilt stabilization
8 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 65