Panasonic WV-SUD638-H Operating Instructions Manual page 13

–
Inclined subject
–
Dark subjects
Auto mode
*2
Select an operation from the pull-down menu and click the [Start] button. The selected operation will start.
Click the [Stop] button to stop the operation. The selected operation will stop when the camera (panning/
tilting/zooming/focusing) is operated or when an action that is to be taken according to the settings for "Self
return"(®page 55) or for "Camera action on alarm" (®page 101) starts.
Note
•
The [Start] button for "Auto mode" cannot be operated while the washer is operating. Operate auto
mode after the washer has finished operating.
•
Auto track: Automatically tracks objects in the shooting area.
Note
•
With the Auto track feature, objects moving in the screen are picked out and automatically tracked.
•
In the following situations, targets may not be able to be tracked, or false detections may occur.
–
when there is little contrast between the subject and the background
–
when the front glass is dirty or wet
–
when there are large changes to the lighting intensity
–
when there are many moving objects other than the subject
–
when there is a change to the axis of the camera's lens
–
when the subject moves directly underneath the camera
–
when there is harsh flickering
–
when there are reflections from light entering the front glass due to reflections from a window
or road, or from a backlight
–
when the target is hidden behind a utility pole or other objects
–
when the subject passes by other moving objects
–
when the target moves too fast or too slow
–
when the camera is shaking
•
When the zoom ratio is set to the "Tele" side, it may be difficult to obtain accuracy with the auto
tracking function. It is recommended to use the auto tracking function with setting the zoom ratio
to the "Wide" side.
•
During auto tracking, if the camera is operated using the control pad or by other methods, or if an
alarm occurs, auto tracking is stopped.
•
Auto pan: Automatically pans between the start position and the end position set in advance
(®page 75).
Even when the camera is operated for zooming or focusing, the camera continues panning. (However,
panning will stop when the zoom button (x1) is clicked.)
•
Preset sequence: Automatically moves to the preset positions (®page 71) orderly (start from the
lowest preset position number).
•
360 map-shot: Moves 45° horizontally at a time and repeats 8 times to shoot images of each 45°
position (45° x 8 = 360°), and then displays 8 thumbnail images of each 45° position (45° x 8 = 360°)
on a newly opened window. When a thumbnail image is clicked, the camera moves to the respective
position and live images will be displayed on the "Live" page.
•
Preset map-shot: 8 thumbnail images of the preset position 1-8 (®page 71) will be displayed orderly
on a newly displayed window. When a thumbnail image is clicked, the camera moves to the respective
position and live images will be displayed on the "Live" page.
Note
•
Do not operate the browser until all the thumbnail images are displayed and the camera returns to
the original position (where the camera was when "360 map-shot" or "Preset map-shot" was carried
out).
1 Monitor images on a PC
Operating Instructions 13