RX-V475/HTR-4066/RX-V500D
When checking the MAIN (1) P.C.B.:
•
Place the P.C.B.s (with rear panel) upright. (Fig. 4)
•
Connect the heatsink and rear panel to the chassis
with a ground lead or the like. (Fig. 4)
•
Reconnect all cables (connectors) that have been
disconnected.
•
When connecting the flexible flat cable, be careful
with polarity.
20
MAIN(1)P.C.B. をチェックする場合には:
・ リアパネルと一緒に P.C.B. を立ち上げて置きます。
(Fig. 4)
・ ヒートシンク、リアパネルをリード線等でシャーシ
に接続してください。 (Fig. 4)
・ 外したケーブル(コネクター)をすべて接続します。
・ フラットケーブルを接続する際、極性に注意してく
ださい。
Rear panel
リアパネル
Ground lead
アース線
Heatsink
ヒー トシンク
Fig. 4
Ground lead
アース線
Chassis
シャーシ