Table of Contents
Advertisement
16 Quick Disc Playback
DVD
AUDIO CD
1
DVD 795SA
DVD VIDEO/SACD PLAYER
STANDBY-ON
There are many playback features and options available on Discs. After
familiarizing yourself with the Player and its remote control as described
on pages 17-21, see pages 22 and following to try additional features.
1
Press STANDBY-ON to turn on the Player. The red Standby
light will disappear from the front of the Player.
Turn on your TV. Set it to the correct Video In channel.
You should see the Player's blue background screen on the TV.
2
Press OPEN/CLOSE / on the front of the Player to open
the disc tray. Load your Disc in the tray, with the label facing
up and the shiny side facing down. If the Disc is two-sided, make
sure the side you want to play is facing up.
3
Press OPEN/CLOSE / again to close the tray. Playback
may begin automatically.
4
If playback does not start automatically, press PLAY 2.
Playback will stop at the end of the Title or after the last Track.
If DVD playback does not start automatically, a Disc menu
may appear. If the Title or Chapter selections are numbered,
press a Number button to select an item. Or, press 1
234 to select an item for playing, then press OK.
5
To stop playback at any time, press STOP C.
Resume
The Resume feature is available with the last five DVDs,Video CDs, and
Super Video CDs you played. Pressing STOP C to stop playback sets up
the Resume feature.The next time you start playing the Disc, play will
resume at the same point at which you last stopped it.
However, if you press STOP C twice to stop Disc playback, Resume will
not be activated.The next time you start playing the Disc, play will start
at the beginning of the Disc.
If the Resume symbol (see below) appears on the TV screen when you
reload a Disc, play will resume from the point at which you last stopped
playback if you press PLAY 2 while the Resume symbol appears.
resume
Resume symbol
VIDEO CD
SACD
SMART PICTURE SOUND
OPEN/CLOSE
PLAY/PAUSE
PREV
NEXT
2,3
MENU
STOP
OK
T-C
DIM
FTS
1
2
4
5
7
8
RETURN
0
DISC
MENU
É
OK
G
PLAY
STOP
Ç
É
SUBTITLE
ANGLE
ZOOM
REPEAT
REPEAT
SHUFFLE
A-B
5
Helpful Hints
• If the Disc is Locked by Access
Control, you must enter the four-
digit code or unlock the Disc.
Details are on pages 29-32.
• DVDs have a region code.Your
Player will not play discs that
have a region code different from
the region code of your Player.
The Player's region code is 1
(one). Details are on page 7.
• Resume may not be available
with all Discs.
• When playing MP3 files or
SACDs, you will not have sound if
you used the DIGITAL AUDIO
OUT jacks. See page 35 for
details.
• If a Video CD will not play, make
sure Playback Control is Off.
Details are on page 36.
• If you have no picture and you
did not use a Progressive Scan
connection, set the
PROGRESSIVE/INTERLACE
switch on the rear of the Player
to INTERLACE.
POWER
2
SOUND MODE
3
6
9
DISPLAY
4
SYSTEM
MENU
É
H
PAUSE
4
Å
AUDIO
SCAN
4
Advertisement
Table of Contents
