Quick Disc Playback - Philips DVD590M Owner's Manual

DVD590M_17x 6/11/2003 1:42 PM Page 16

16 Quick Disc Playback

1
Press Standby y y to turn on the Player.
2
Turn on your TV. Set it to the correct Video In channel.
You should see the blue DVD background screen on the TV (if no
Disc is in the Player).To find the correct Video In channel, go to
your lowest TV channel, then change channels down until you see
the blue DVD background screen.The Video In channel will be
channel 3 or 4 only if you are using an RF modulator as shown on
page 9.
3
Gently insert a Disc into the Disc Slot so about one-third
of the Disc is in the slot. From that point, the Player will
take the Disc and load it automatically.
Load a single Disc with the label facing LEFT and the shiny side
facing RIGHT. If a Disc is two-sided, make sure the label of the side
you want to play is facing left when you insert the Disc.
Do not force a Disc into the Disc Slot. If the Player does not
immediately accept the Disc, take away the Disc. Press Eject A A to
make sure there is not a Disc in the Player already.
4
After the Player loads the Disc, play may begin
automatically. If not, press Play/Pause 5 ; B F. Play will stop at
the end of the Title or after the last Track.
If DVD play does not start, a Disc menu may appear. If the Title or
Chapter selections are numbered, press a Number button to select
an item. Or, press 1, 2, 3 or 4 to select an item, then press OK.
5
To stop play at any time, press Stop C once. To resume
playing the Disc later from the same point, press Play/Pause 5 ; B F.
This is the LAST PLAY feature.
If you press Stop C twice to stop playing the Disc, play will start at
the beginning of the Disc the next time you resume play.
Label faces left
Shiny side faces right
3
1
1 2 3
EJECT
4 5 6
7 8 0
9
PREVIOUS NEXT
DISC MENU SYSTEM MENU
OK
RETURN/TITLE DISPLAY
SUBTITLE ANGLE ZOOM AUDIO
REPEAT REPEAT SEARCH MUTE
A-B
Helpful Hints
• If a Disc is locked by Parental
Control, enter your password and
press OK to watch the Disc.
Details are on pages 27-28.
• DVDs have a region code.This
Player only plays DVDs that are
Region 1 (one) or All. Details are
on page 7.
1
4,5