Quick Disc Playback 15 - Philips DVD724 Owner's Manual

DVD AUDIO CD
1
There are many playback features and options available on Discs. After
familiarizing yourself with the DVD Player, see pages 19 and following to try
additional playback features.
1
Press the POWER ON/OFF button on the front of the DVD
Player to turn on the Player.
Turn on your TV. Set it to the correct Video In channel. You
should see the DVD screen saver on the TV (if no Disc is in the
Player).
2
Press OPEN/CLOSE on the front of the DVD Player to open the
disc tray.
Load your Disc in the tray, with the label facing up. If the Disc
(DVD) is two-sided, make sure the side you want to play is facing up.
3
Press OPEN/CLOSE again to close the tray.
4
Playback may start automatically. If not:
• If you are playing a DVD, a Disc menu may appear. If the Title or
Chapter selections are numbered, press a Number button to
select an item. Or, press 341 2 to select an item, then press
OK. Playback will begin. Or, follow the on-screen instructions as
detailed in the DVD Disc menu.
If you are playing an Audio CD, press PLAY 2 to start playback.
•
• If you are playing a Video CD that has Playback Control, press
the DISC MENU button to access the menu or index of the
Video CD. Press the Previous
Number buttons to select an item, then press OK. Follow the
instructions provided by the Video CD. Not all Video CDs have
Playback Control. See the Disc case or menus for details.
5
To stop playback at any time, press STOP C.
If you press STOP C only once, playback will resume at the same
point if you press PLAY 2 later to restart playback.This is known as
the Resume feature.
If you press STOP C more than once to stop playback, play will start
at the beginning of the Disc again if you press PLAY 2 later to
restart playback.
VIDEO CD
4 ¢
, 3, 4, 1, 2, or
, Next

Quick Disc Playback 15

2-3
5
4
Helpful Hints
• You can turn on the DVD Player
by pressing POWER 2 on the
remote only if the POWER
ON/OFF button on the front of
the Player is depressed.
• If the Disc is locked by Parental
Controls, you must enter your
password or unlock the Disc.
Details are on pages 27-29.
• DVDs have a region code.Your
Player will not play Discs that
have a region code different from
the region code of your Player.The
Player's region code is 1 (one).
Details are on page 7.
• Opening the disc tray or turning
off the DVD Player's power may
cancel the Resume feature.
• To open or close the disc tray
using the remote, press and hold
the Number 1 button for two
seconds or until OPEN or CLOSE
appears on the display panel.