IBM Aptiva 2170 Hardware Maintenance Service Manual page 93

3. Select Settings, then select Control Panel.
4. Select the Sound icon.
5. In the Sound window, select chimes from the Names field. (To test other
adapter card software, select an action from a menu in that software.)
005 - IS THE PREVIEW BUTTON, OR ACTION IN OTHER SOFTWARE,
SELECTABLE ON THE SCREEN (SHOWN IN BLACK AND NOT GRAY)?
(YES, GO TO STEP 006. NO, READ AHEAD.)
•
Ensure that Windows 98 is properly installed.
•
Go to step 001.
006 -
•
Select the Preview button from the Sound window.
007 - DO YOU HEAR ANY SOUND FROM THE SPEAKER? (YES, READ
AHEAD. NO, GO TO STEP 008.)
•
The audio feature is functioning normally. Click Cancel to close the dialog
box. Exit Microsoft Windows 98.
•
If the symptom remains or has changed, go to "Index of Symptoms,
Messages, Error Codes, or Beeps" on page 37.
•
End.
008 -
•
Make sure that the volume control is not turned low.
•
Make sure that the speaker and its adapter are not damaged.
• Make sure that the speaker is plugged in speak-out jack. See "Machine
Type 2170 System Board Jumpers and Connectors" on page 147 and
"Machine Type 2171 and 2172 System Board Jumpers and Connectors" on
page 150
•
If the error cannot be resolved, replace the system board.
•
End.
Check Procedures 59