Zip Drive Rear Panel Connectors And Jumpers - IBM Aptiva 2170 Hardware Maintenance Service Manual

Zip Drive Rear Panel Connectors and Jumpers

Zip Drive Rear Panel Connectors and Jumpers

Item
1 Power supply connector
2 Configuration jumper.
CS
--
--
On
--
3 Interface connector
4 Emergency Eject Hole
Zip Drive Emergency-exit <option>
ATTENTION: Make sure to turn off the power before manual disc eject
operation.
Function
SL MA Description
-- On Master
-- -- Slave.
-- -- Cable select
On -- Reserved(do not use).
If for any reason the tray does not eject automatically, insert
and press an eject-bar inside the emergency eject hole to
manually eject the tray. A straightened paper clip with a
diameter of 1.2 mm (typical) can be used as an eject-bar.
Connect to...
Power supply
--
System board
2170: CN12
2171/2172: CN10
--
173