Epson TM-P60 Installation And Setup Manual page 7

10. Select the Wireless tab and enter the wireless information including the SSID and WPA2
PassKey.
11. Once you have added the Wireless information click Apply and OK. The configuration
changes will be sent to the printer; this will take a few seconds.
12. Once complete you will be returned to the Configuration screen. Go to Tools and
Refresh the screen.
13. Once you see the new printer IP address appear you can disconnect the printer and
reboot the printer. Once the Printer comes back online it will beep and the green power
light will blink until the printer connects to the wireless network.
Epson TM-P60 Setup Guide | October 7, 2013| pg 4