FEATURES
All weather outdoor speaker with an IPX6 ingress protection rating
90Hz ~ 20kHz frequency response
99dB sound pressure level
Built-in step-down transformer for use in a 70V or 100V constant voltage speaker
array
Handles up to 50-watts of power
Includes mounting bracket
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below.
1x Outdoor horn speaker with mounting bracket
1x User's manual
CONSTANT VOLTAGE VS 8-OHM SPEAKER SYSTEMS
A constant voltage speaker system differs from a traditional 8-ohm speaker system in that
it uses a step-up transformer at the audio source to raise the voltage and lower the current
on the transmission line. At the speaker end, a step-down transformer converts the signal
back to a normal speaker level voltage. This reduces power loss during transmission, which
allows for the use of longer speaker wire runs using smaller gauge wire.
Additionally, a constant voltage speaker system allows for the use of multiple speakers on
each channel, without the need for complicated impedance calculations and
configurations. In a constant voltage system, all speakers on a given channel are connected
in parallel and the complicated impedance calculations are replaced by simple wattage
calculations.
3