Fig - Makita BPT350 Technical Information

W
iring diagram
Fig. D-2
Fig. D-3
Fig. D-4
Housing L Side
Flag connector with lead wire (orange) has to be connected so that
the Lead wire faces Housing L side.
Wiring to D.C Motor
Housing Set (L) Side
Lead Wire (red)
Terminal without red marking
Flag connectors have to be connected so that the wires faces Housing L side.
Connect Flag connector with lead wire (red) to Terminal with red marking.
Wiring to Terminal
Lead wires (orange)
Flag Connector
Flag connector with lead wires (black) has to be connected to - Terminal
so that the lead wires pass over the mark of - poles.
Flag connector with lead wires (orange) has to connected to + Terminal
so that the lead wires face the opposite side against the mark of + poles.
Wiring to Switch
Lead wire
(orange)
Red marking for distinction of + Terminal
Terminal with Red marking
Flag Connector
Lead Wire (black)
Lead wires (black)
Mark of Poles
Flag connector
Terminal
P 12/ 13