Line Spacing Commands - Epson TM-U200 Information Manual

ESC e n prints the data in the print buffer and feeds n lines in the reverse direction. The amount of
paper fed per line is based on the value set using the line spacing command. The maximum reverse
paper feed amount is 48/144 inch. The default setting of the paper feed amount is 1/6 inch. Only the
TM-U200D/PD supports this command.
Program Example
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&H1B);"e";CHR$(1);
PRINT #1, " CCCCC"; CHR$(&HA);

Line Spacing Commands

The TM-U200/U200P printers support the following commands for setting line spacing. These
commands only set the line spacing; they do not actually advance the paper. The line spacing set
using these commands affects the results of the LF, ESC d, and ESC e commands, or when the paper
is advanced using the PAPER FEED button.
Command Name
ESC 2 Select default line spacing
ESC 3 Set line spacing
ESC 2
[Name] Select default line spacing
[Format] ASCII
Hex
Decimal
ESC 3 n
[Name] Set line spacing
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
ESC 2 sets the line spacing to 1/6 inch. This is equivalent to 12 dots.
Rev. A
ESC 2
1B 32
27 50
n
ESC 3
1B 33 n
27 51 n
TM–U200/U200P Information Manual
Print Sample
Paper reverse fed one line after
AAAAACCCCC
printing line of Bs
BBBBB
Command Descriptions 1-7