Receipt Issuing - Epson TM-U200 Information Manual

Chapter 2
Application

Receipt Issuing

This section presents examples illustrating the functioning of the ESC/POS commands and an actual
print sample.
Procedure for Receipt Issuing Using the TM-U200B
Procedure
1. Stamp printing
2. Print date and time
3. Print Item A
4. Print Item B
5. Cut paper
Rev. A
Commands used
ESC 3, ESC a, ESC t, ESC !,
ESC U, ESC 2, LF, CR
ESC a, ESC d
ESC t, ESC !, LF
ESC !, ESC U, LF
GS V
TM–U200/200P Information Manual
Description
Specifies a print position to the center by using the ESC a
command. Changes the character code table by using
the ESC t command, and prints a stamp date in the center
of the paper roll in the unidirection. Adjusts line spacing for
a line data being continuous.
Specifies a print position to the left by using the ESC a
command after printing the date and time in the center of
the paper roll.
Selects the character code table page 1 by using the
ESC t command, the 7 x 9 font by using the ESC !
command, and prints the Item A.
Specifies double-height by using the ESC ! command, and
prints "TOTAL" in the unidirection. Cancels the double-
height and prints in the bidirectional mode for other lines.
Feeds the paper to the cutting position and executes
cutting.
Application 2-1