Rear View; Quick Start - OWC Mercury Pro Assembly Manual & User Manual

1.5 REAR VIEW

1. USB 3.1 Gen 1 port — Connect the included USB 3.1 Gen 1 (Standard-A to Standard-B)
cable here.
2. DC Power — Connect to the included power supply here.
3. Kensington® Security Slot — Connect a security tether here.
4. Power Switch — Use this switch to power the drive on or off.

1.6 QUICK START

Plug the power supply into the DC power port on the OWC Mercury Pro and into a power
outlet. Connect the included USB 3.1 Gen 1 cable to your computer and the Mercury Pro,
then power on the Mercury Pro using the Power switch.
Notes: always unmount and eject the disc before powering off the optical drive.
OWC MERCURY PRO
1
3
3
2
4
INTRODUCTION