Midi Editor Software Functional Description - midiplus minicontrol Owner's Manual

MIDI Editor software functional description

Function of the serial number
(1)Filename
(2)New construction parameters(NEW)
(3)Open the construction file(OPEN)
(4)Reset parameters and
data(RESET)
(5)Export construction file(EXPORT)
(6)Save the parameters(SAVE)
(7)Sync to computer(SYNC TO PC)
(8)Sync to the device(SYNC TO FW)
(9)The composite function area
(10) Pusher potentiometer(SLIDER)
6.1 Filename
Users in the area of autonomous operation function.
6.2 New construction parameters (NEW)
Click "NEW", at the option to restore for the default parameters.
6.3 Open the construction file (OPEN)
Click "OPEN", can open the saved construction file, the file named "***. CUS"
6.4 Reset parameters and synchronize data to the device (RESET)
If minicontrol connected, click the "RESET", the software configuration parameters
restore to the factory, and synchronous data to the minicontrol ;
MIDIPLUS Co, Ltd.
Function of the serial number
(11) Encoder (DATA)
(12) Drum PAD
(13) Function of the alias
(14) Modify the alias
synchronize
(15) Data byte(VALUE)
(16) Edit channel(CHANNEL)
(17)Data type(TYPE)
(18) Real-time status information
8 http://www.midiplus.com.tw