Alarm / Mission Elapsed Time - Omega CALIBRE 1666 Technical Manual

Fig. 2.4
Fig. 2.5
OMEGA SA
Specifi c Information for calibre 1666
2.4 ALARM
- Press P1 :
- Press P2 to add or P3 to subtract hours.
- Press the crown into position 1. The
automatically set and
- Press the crown or a push button to stop the alarm.
- Press P1 for more than one second to set the alarm
on
( is displayed and sound signal is heard) or to stop
the alarm (
- Alarm ring : press P2 for more than 3 seconds to test the
sound of the alarm ring.
2.5 MISSION ELAPSED TIME (
Description
With this chronograph function, the elapsed time of a
mission of long duration can be timed. Already elapsed
days, hours, minutes and seconds can be programmed
before the function is started.
- Press the crown until
- Pull out the crown to position 2 :
Press P1 and
return-to-zero.
To start timing at the beginning of the mission
- Push the crown back into position 1
- Press P1 to start the timing
Adding already elapsed time
- Press P1, the seconds (
- Press P2 to add or P3 to subtract seconds.
- Press P1, the minutes (
- Press P2 to add or P3 to subtract minutes.
- Press P1, the hours (
WORLD SERVICE ORGANIZATION
HOURS
is displayed and the hours blink.
ON
is displayed.
OF
is displayed).
MT is displayed
Go On ?
RESET ?
is displayed : press P2 or P3 for
SEC
) blink.
MIN ) blink.
Hours
) blink.
GT-19-C-069-E - A - 1666
ALARM
is
)
MT
is displayed.
/13