Omega CALIBRE 1666 Technical Manual

Omega CALIBRE 1666 Technical Manual

13 1/4"
Hide thumbs Also See for CALIBRE 1666:

Advertisement

Technical Guide
Produced by : pelrom
 
13
1/4'''
Ø 30.60 mm
Versions:
Height on movement
Number of jewels
Exclusive OMEGA movement, Multi-function quartz. Luxury decoration, côtes de Genève, gilded
engravings. Display of hour, minute and second in centre. Digital display : hours, minutes and seconds, date,
alarm, mission elapsed time, mission elapsed alarm, universal time, universal time alarm, countdown,
OMEGA SA
Date: 19.11.2009
CALIBRE
Version A
Trimmer
chronograph.
WORLD SERVICE ORGANIZATION
1666
Version B
Limited edition
6.90 mm
9
TG-19-C-069-E
Version C
0
1
2
Heat-compensated
GT-19-C-069-E - A - 1666
A
/1

Advertisement

Table of Contents
loading

Summary of Contents for Omega CALIBRE 1666

  • Page 1 6.90 mm Number of jewels Exclusive OMEGA movement, Multi-function quartz. Luxury decoration, côtes de Genève, gilded engravings. Display of hour, minute and second in centre. Digital display : hours, minutes and seconds, date, alarm, mission elapsed time, mission elapsed alarm, universal time, universal time alarm, countdown, chronograph.
  • Page 2: Table Of Contents

    Calibre 1666 General information for calibre 1666 Major points / Standard movement exchange / Mandatory tools Spare parts list for calibre 1666 Specifi c information for calibre 1666 5-17 CS Test (Customer services) / Operations to enter into CS test mode / Rate adjustment...
  • Page 3: Calibre 1666

    General information for calibre 1666 Major points Information on the battery (ref. 1449953E20) Lithium Ø 23 mm H 2 mm Renata CR2320 Varta CR2320 Energizer CR2320 Standard movement exchange Follow Working Instruction 31 for standard movement exchanges. Complete movement Exchanges...
  • Page 4: Spare Parts List For Calibre 1666

    Spare parts list for calibre 1666 Battery Version Reference 1666A 1449953E20 1666B limited version 1666C 1449953E20 Battery insulator Version Reference 1666A 722166620651 1666B limited version 1666C 722166620651 Time setting stem switch Version Reference 1666A 1666B 722166651020 1666C OMEGA SA WORLD SERVICE ORGANIZATION...
  • Page 5: Specifi C Information For Calibre 1666

    Specifi c Information for calibre 1666 1.0 CS Test (Customer services) Fig. 1.0 1.1 Operations to enter into CS test mode : 1. Remove the battery 2. Wait for the LCD segments to disappear. 3. Hold the crown pressed in.
  • Page 6: Operating Procedure / Sample Calculation

    Specifi c Information for calibre 1666 Operating procedure 1. Measure the rate with an integration time of 960 seconds (sixteen minutes). The rate is measured with the stem pulled out to position 2. Test mode « magnetic » (rate measure of step motor).
  • Page 7: Test Description

    Specifi c Information for calibre 1666 Test description: Identification Test no. Test description IDENTIFICATION Test 0 Software identification display. Displays the current value of the rate correction. This correction is calculated then saved in the movement during production tests. This test is also used to modify this value if necessary. Every...
  • Page 8: Electrical Tests

    Specifi c Information for calibre 1666 1.0 Electrical tests Fig. 1.0 Measurements in movement without battery enclosure. For measurements with battery enclosure, measurement 3 is made directly on the piezzo contact spring. Setting of Position Measurement Test Remarks apparatus Measurement without battery, 10 K 2.6 - 3.4 K...
  • Page 9: Operating Instructions / Functions

    Specifi c Information for calibre 1666 Fig. 1.0 1.0 Operating instructions Functions The crown is the main command button for passing from one function to another. In neutral position 1, it guarantees the watch’s water-resistance. A short press on the crown makes the next function appear ;...
  • Page 10: Time / Hours

    Specifi c Information for calibre 1666 2.0 TIME Fig. 2.0 To set the digital time : TIME - Press the crown until is displayed. Go On ? - Pull out the crown to position 2 : appears. - Press P1, the seconds ( ) blink.
  • Page 11: Hands

    Specifi c Information for calibre 1666 2.2 HANDS Fig. 2.2 To Synchronize the Hands with the Digital Time. This is done only after the correct digital time is set ( TIME - Press P4 for more than 3 seconds to clear the screen.
  • Page 12: Date (Change The Date) / Alarm

    Specifi c Information for calibre 1666 2.3 DATE Fig. 2.3 To Change the Date : - Press the crown until the DATE function is displayed. Go On ? - Pull the crown to position 2 : displayed and the date, month and year blink.
  • Page 13: Alarm / Mission Elapsed Time

    Specifi c Information for calibre 1666 Fig. 2.4 2.4 ALARM HOURS - Press P1 : is displayed and the hours blink. - Press P2 to add or P3 to subtract hours. ALARM - Press the crown into position 1. The automatically set and is displayed.
  • Page 14: Mission Elapsed Time Alarm

    Specifi c Information for calibre 1666 Fig. 2.5 2.5 MISSION ELAPSED TIME ( - Press P2 to add or P3 to subtract hours. - Press P1, the day number ( DAYS ) blinks. - Press P2 to add or P3 to subtract days.
  • Page 15: Universal Time / Set The Universal Time

    Specifi c Information for calibre 1666 Fig. 2.7 2.7 UNIVERSAL TIME ( Universal Time The UNIVERSAL TIME ( ) function makes it possible to display either GMT or a second time zone. In addition to 24 hour time, the number of the day of the year is displayed, as calculated by the perpetual calendar in the DATE function.
  • Page 16: Universal Time Alarm

    Specifi c Information for calibre 1666 Fig. 2.8 2.8 UNIVERSAL TIME ALARM ( Description This alarm rings once, for 15 seconds, at a specified day and time. When the alarm rings, UNIVERSAL TIME ALARM ( ) function is displayed. If the alarm ring is not stopped, a second alarm rings one minute later for 15 seconds.
  • Page 17: Countdown / Start And Stop Of The Countdown / Chronograph

    Specifi c Information for calibre 1666 2.9 COUNTDOWN ( Fig. 2.9 To program the countdown time (maximum countdown 99:59:59 ; ) - Press the crown until CDT 00:00:00 is displayed. - Push the crown during 3 seconds or pull it to position 2.

Table of Contents