Bluetooth; Bluetooth Settings; Bluetooth Connection - Pioneer MVH-29BT Owner's Manual

Purpose
Search for a file from a list
View a list of the files in the selected
folder/category*
Play a song in the selected folder/
category*
Repeat play
Random/shuffle play
Pause/resume playback
* Compressed audio files only

Bluetooth

Bluetooth connection

1
Turn on the Bluetooth function of the device.
2
Press to display the phone menu.
3
Turn the M.C. dial to select [BT SETTING], then press to confirm.
4
Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices.
• To cancel searching, press the M.C. dial.
• If the desired device is not in the list, select [RE-SEARCH].
• If there is no device available, [NOT FOUND] appears in the display.
8
En
Operation
1 Press
to display the list.
2 Turn the M.C. dial to select the
desired file (folder) name or
category, then press to confirm.
3 Turn the M.C. dial to select the
desired file, then press to confirm.
Playback starts.
Press the M.C. dial when a folder/
category is selected.
Press and hold the M.C. dial when a
folder/category is selected.
Press 6/ .
Press 5/ .
Press 4/PAUSE.
5
Turn the M.C. dial to select a device, then press to confirm.
Press and hold the M.C. dial to switch the displayed device information
between the Bluetooth device address and device name.
6
Select [Pioneer BT Unit] shown in the device display.
7
Make sure the same 6-digit number appears on this unit and the device,
then select "Yes" on the device.
NOTES
• Depending on the device, the PIN code is required in step 7. In this case, input [0000].
• Only one single device can be paired/registered at any one time. The previously paired/
registered phonebook and preset information is overwritten/deleted when a new device
is paired/registered to this unit.
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth
device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a
Bluetooth device operations, refer to the operating instructions supplied with the
Bluetooth device.

Bluetooth settings

Menu Item Description
BT CONNECT Display the paired Bluetooth devices. "*" appears on the
device name when the Bluetooth connection is
[ON], [OFF]
established.
ADD DEVICE Register a new device.
A.CONN Select [ON] to connect to a Bluetooth device
automatically.
[ON], [OFF]
VISIBLE Select [ON] so that a Bluetooth device can detect the
unit when the unit is connected via Bluetooth to another
[ON], [OFF]
device.