Pioneer MVH-29BT Owner's Manual page 7

SRC (source)/OFF
M.C. (multi-control) dial
USB devices (including Android)
1
Open the USB port cover.
2
Plug in the USB.
NOTE
To automatically switch to [USB] source when a USB device is connected to the unit, set
[USB AUTO] to [ON] in the SYSTEM settings (page 13).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device
connected directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
A device installed with Android OS 5.0 or later can be connected to the unit via
AOA, using the cable supplied with the device.
Listening to music on Android
This function is compatible with devices that have Android OS 5.0 or later
installed and also support AOA (Android Open Accessory) 2.0.
1
Press SRC/OFF to select [ANDROID].
USB port
AUX input jack (3.5 mm stereo jack)
NOTE
Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to
their own software design, regardless of the OS version.
Basic operations
Purpose
Select a track
Fast forward or reverse
Pause/resume playback
AUX
1
Insert the stereo mini plug into the AUX input jack.
2
Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source
(page 12).
Operations
You can make various adjustments in the FUNCTION settings (page 11).
Note that the following operations do not work for an AUX device. To operate
an AUX device, use the device itself.
Purpose
Select a folder/album*
Select a track/song (chapter)
Fast forward or reverse
Operation
Press or .
Press and hold or .
Press 4/PAUSE.
Operation
Press 1/ or 2/ .
Press or .
Press and hold or .
En
7