Error Codes; Displays Error Code On The Control Screen - Btwin Elops 900E User Manual

Displays error code on the control screen

Fault code
1
2
3
4
5
6
7
8
Bad connection between the control screen and
9
Pedalling sensor connector
Cable accessories connector
Motor cable connector
The rims are subject to wear which must be checked to ensure they are intact.
The motorised wheel is also subject to higher stress than a standard bike wheel, and although it is reinforced,
it is possible that spokes may break. If a spoke breaks, contact your DECATHLON store.
If the bike or battery suffers a fall, check that your battery is intact. Caution: the watertightness of your battery
is no longer guaranteed following a fall.
Definition
Undervoltage protection
Motor fault
Motor fault
6 months
Brake sensor fault
Battery on
Motor fault
Controller communication error
the controller

Error codes

Battery charger. If the situation does not improve, go to your local Decathlon
Press in the motor connector properly
Press in the motor connector properly
We advise you to bring your electrically-assisted bike back to your DECATH-
LON store for its 6-month service.
Check that the brake connectors are pressed in properly
Battery charger. If the situation does not improve, go to your local Decathlon
Press in the motor connector properly
Check that all connectors are pressed in properly
Check that all connectors are pressed in properly
Solutions
store.
store.
Control screen connector
Brakes connector
15