INVENTOR INVHM82A User Manual page 10

Reversing the Door Swing
Tools required: Philips screwdriver, f f lat bladed screwdriver, and Hexagonal spanner.
Ensure the unit is unplugged and empty.
Ÿ
Tilt the unit slightly backwards to take the door off. You should rest the unit on something solid
Ÿ
so that it will not slip during the door reversing process.
Save all removed parts for the reinstallation of the door.
Ÿ
Do not lay the unit flat as this may damage the coolant system.
Ÿ
We recommend that 2 people handle the unit during assembly.
Ÿ
1. Remove the top right hinge cover.
2. Unscrew the screws. Then remove the hinge bracket.
3. Remove the top left screw cover.
4. Move the core cover from left side to right side. And then lift the upper
door off and place it on a padded surface to prevent it from scratching.
7