Schedule; Recording Schedule - D-Link DNR-322L User Manual

Section 4 - Configuration
Once the cameras have been set up, a highly configurable scheduling system allows for continuous recording or recording
during specifically allotted time frames. Each camera can be set to record independently at preset intervals. It also provides
event recording based on specific triggers. The NVR also can be configured to overwrite the oldest data automatically when
Hard Disk space runs out, allowing for continuous and uninterrupted recording. You can specify the number of days the
recording should be kept (within the limits of the Hard Disk capacity).
Set Recording Mode
Enable
Record according to a schedule.

Schedule

Recording:
Enable Select this option to automatically empty disk space when the disk space
Automatic is full. This will overwrite the earliest recorded video with the latest video
Overwrite: one day at a time.
Enable Audio Set the duration to store recorded video clips. After the duration, the clips
Record: will be purged.
Store Video Keep at least [x] days of video footage on hard disk when the video
[x] Days: recycles.
Set Recording Schedule
Always Click this button to enable always on recording for all IP cameras.
Record:
Add/Edit Select a camera from the camera list, and click Add/Edit Schedule to
Schedule: create a new schedule for the selected camera.
Delete Select a camera from the camera list, and click Delete Schedule to delete
Schedule: the schedule for the selected camera.
Copy Select a camera from the camera list, and click Copy Schedule to create a
Schedule: duplicate schedule.
D-Link DNR-322L User Manual
Schedule

Recording Schedule

44