Disc Operation; Usb Operation - Kruger&Matz KM1908 Owner's Manual

Owner's manual

DISC OPERATION

1. While in ON mode, press the
the remote control repeatedly to select DISc mode.
2. Press the button to open the disc door and place the disc on the disc tray (with
the printed side up).
3. Press the button to close the disc door, the unit will read the disc and play it
automatically.
Note: If the playback does not start automatically, select a title/chapter/track and
then press the

USB OPERATION

1. Insert the USB device's USB plug into the USB socket.
2. Press the USB button on remote control or
USB source.
3. Playback starts automatically. If the playback does not start automatically, select
a title/chapter/track and then press the
USB Storage Device Data Protection
• Always insert the USB device in the correct direction. Failure to do so may result
in damage to the USB device and this unit.
• Do not remove the USB device while it is being accessed.
• Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suffer damage, resulting in data loss.
button on the unit or the SOURcE button on
button.
button on the unit to select the
button
43