Playing The Beginning (Intro) Of Each Track; Playing Repeatedly (Cd Disc); Mp3/Wma Disc Playing; Text Display During Playback - Kruger&Matz KM1533 Owner's Manual

Playing the Beginning (Intro) of each Track

Press the intro button (INTRO) on the remote control to play the beginning of
each track consecutively. The playing time of each track is 10 seconds.
When you hear the desired track, press the

Playing Repeatedly (CD disc)

• ONE and ALL Repeat Play can be set by pressing the mode button (MODE).
- First press : To repeat the same track, the words "TRK" and " REP" will blink.
- Second press : To repeat playing all tracks on a disc, the words "TRK" will
- Third press : To play tracks randomly, the words "TRK" will stay lit and
- Fourth press : To cancel the repeat playing, the word "SHUF" will disappear.
• Repeat A-B can be set by pressing the repeat A-B button (A-B).
- First press : Select the start point, the words "A-" will stay lit.
- Second press : Select the end point, the words "A-B" will stay lit.
- Third press : To cancel repeat play, the word "A-B" will disappear.
Note: The section A and B can be set only within the same track.

MP3/WMA Disc Playing

Note:
* MP3/WMA music playback from CD maybe be affected due to the type and format of
disc or condition of the recording. If you are having trouble playing a certain disc, it is
recommended to use USB input instead for best MP3/WMA playback.
1. Repeatedly press the source button (SOURCE) on the unit or directly press the CD
function button (
- The word "DISC" will be displayed on the front panel.
2. Press the button to open the disc door and place the MP3/WMA disc on the disc
tray (with the printed side up).
3. Press the open/close button ( ) to close the disc door, the unit will read the disc and
play it automatically.
Note: If in stop mode, please press the play/pause button (
4. Press the play/pause button (
again, it will continue to play.
5. Press the stop button ( ) to stop the disc playing.

Text Display During Playback

Press the DISPLAY button on the remote control, ID3 information (song title and artist)
will be displayed or "NO ID3" if there is no ID3 information. Press this button again,
album, track and playing time will be displayed.
44
Owner's manual
stay lit and "REP ALL" will blink.
"SHUF" will blink.
) on the remote control to select the disc source.
) to temporarily stop the playing, press the button
button twice.
) to start playing the disc.