ViewSonic CDM4300R User Manual page 38

HDMI with One Wire
CEC control.
• {Off} - Disable CEC.
• {On} - Enable CEC.
Auto signal detection
Choose to let the display detect and display available signal sources automatically.
• {Off} - Once a signal is connected, it can only be selected manually.
No signal, set the display to display the image automatically according to the search order of each
option.
Power Save
Power save modes
{Mode 1}: DC off -> Power off. LED: Red. Power Save -> Power off, LED: Red
{Mode 2}: DC off -> Power off, LED: Red. Power Save -> Power Saving. LED: Orange. Can be wake up.
{Mode 3}: DC off -> Back light off, LED: Red. Power Save -> Back light off, LED: Orange. Can be wake up.
{Mode 4}: DC off -> Back light off, LED: Red Power Save -> Will not enter power save mode. show "no
signal" only.
NOTE: When Auto FW update is not OFF, display will work under Mode3 for FW update, but OSD item will
not change.
Scalar FW Update
Update scalar FW by USB
Auto FW Update
Setup Android FW auto background update time.
NOTE: When Auto FW update is not OFF, display will work under Mode3 for FW update, but OSD item will
not change.
USB Cloning
Copy PD settings from one set to another.
Import: Copy settings from file to display
Export: Copy PD settings into file.
NOTE: Cloned data stores in android internal storage. User need to use APK to copy cloned data to another
display.
Advanced option reset
Reset all settings in the advanced option menu to factory preset values.
30