ViewSonic CDM4300R User Manual page 35

Tiling
H monitor
V monitor
Position
Frame comp.
Enable
Switch on delay
Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
H MONITORS
1
3
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
H MONITORS
1 2 3
6 7 8
11 12 13
16 17 18
21 22 23
• {H monitors} - Select the number of
displays on the horizontal side.
• {V monitors} - Select the number of
displays on the vertical side.
• {Position} - Select the position of this
display in the screen matrix.
comp.} - Choose to turn the frame
• {Frame
compensation function on or off. If selected
{Yes}, the display will adjust the image to
compensate for the width of the display
bezels in order to accurately display the
image.
1
 
1
 
1
 
No
 
No
 
Off
 
2
Position
4
4 5
Position
9 10
14 15
19 20
24 25
Frame comp. - Yes
Frame comp. - No
• {Enable}: Choose to enable or disable
the Tiling function. If enabled, the display
will apply the settings in
monitors}, {Position}, and
• {Switch on delay}: Set the power-on
delaying time (in seconds). The default
option {Auto} allows a sequential powering-
on for each display by their ID number when
multiple displays are connected.
The options are:{Off/Auto/2~255}
NOTE: The Tiling function will be disabled when
the PIP enabled.
Off Timer
Set automatically power off time (in hours).
27
{H monitors}, {V
{Frame comp.}.