6.4.
HDD Hardware Test
1. Set the mode dial "HDD Recording" mode.
2. While keep pressing the "[LEFT<] of cursor" button and "delete" button, hold down the Mode Select Switch towards to
"[FOCUS]" position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 14 ] HDD hardware test.
Operation specifications
Indication contents
• HDD hardware test display
Display the HDD hardware test result information.
• The error cord contents which are displayed
Push the menu button to end the service mode, and then POWER OFF.
Error code
NO ERROR
It is normal without the error
CTR ERROR
Controller Resistor Error
BUFF RAM ERROR
Buffer RAM Error
ECC DEV ERROR
ECC device Error
CPU ERROR
CPU RAM/ROM Error
COMMAND
Reserved
Function
24