Table Of Contents - Sony HDC-HS9P Service Manual

TABLE OF CONTENTS

1 Safety Precaution -------------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.)--------3
1.4. How to Discharge the Capacitor on Flash
PCB------------------------------------------------------------4
2 Warning --------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord(For EG/GC/SG)-----------------6
2.4. How to Replace the Lithium Battery -------------------7
3 Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------8
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
3.5. Precautions for Handling HDD------------------------ 10
3.6. Formatting HDD ------------------------------------------ 13
4 Specifications ---------------------------------------------------- 14
5 Location of Controls and Components------------------ 16
6 Service Mode ----------------------------------------------------- 20
6.1. Drive Information Display ------------------------------ 21
6.2. Lock Search History Indication ----------------------- 22
6.3. HDD Self Check ------------------------------------------ 23
6.4. HDD Hardware Test ------------------------------------- 24
7 Service Fixture & Tools --------------------------------------- 25
7.1. When Replacing the Main PCB ---------------------- 25
7.2. Service Position ------------------------------------------ 25
8 Disassembly and Assembly Instructions --------------- 27
8.1. Disassembly Flow Chart-------------------------------- 27
8.2. PCB Location---------------------------------------------- 27
8.3. Disassembly Procedure -------------------------------- 28
9 Measurements and Adjustments -------------------------- 43
9.1. Electric Adjustment -------------------------------------- 43
10 Factory Setting--------------------------------------------------- 45
10.1. HOW TO TURN
SETTINGS? ----------------------------------------------- 45
10.2. WHAT IS THE FACTORY SETTINGS? ------------ 45
PAGE
ON THE FACTORY
2
PAGE